-
Machinery Analyzer Pro RBMCONSULTANT - CSI 2130
By The exceptional engineering product, the Model 2130 offers the most efficient analysis tools available today. The patented technology solutions from Emerson, such as the signal processor PeakVue ®, is offering the fastest and most reliable indication of the failures that are occurring. The problems of the machines are given during the collection of standard data analysis tools and automatic on-board enable the collection of all additional data nedded for making a diagnosis of the machine even on the field.
The unmatched speed of data collection is usually translated into a reduction of 20 to 50% of the time of data collection. The Model 2130 allows your maintenance staff to inspect your equipment, especially in a time much shorter.
A large, colorful display - VGA, with user interface easy to use, help messages and embedded intelligence to make simple operation since the first time you use the equipment.
Data Collection ultrafast- Analysis of Gears / Bearings PeakVue ®
- Intelligence built-in expert analysis
- Large Color Display and
- Casing with IP-65 sealing
- Large Capacity Memory
Versions are available for security classification, approved for Class I, Division II and classified in Groups A, B, C, & D. Performance specifications for the version of security classification is identical to the standard model.
Physical Specifications- Power Supply
- Color Display: 5.75 "x 4.25" (146 mm x 108 mm)
- Transflective liquid crystal display (for indoor or outdoor) with backlight (backlight) built-in 640 x 480 pixels.
- Keypad: Large, easy to press keys, 12 function keys and shortcut key help.
- Height: 8 "(203 mm)
- Depth: 1.88 "(48 mm)
- Width: 10.25 "(260 mm)
- Weight: 4.5 lbs. (2.04 kg)
- Humidity: Enclosure sealed, IP-65 rating
- Temperature: 15 to 113 º F (-10 to 45 º C)
- Battery: NiMH
- Capacity: 4.5 amp hours
- Voltage: 7.2 V
Battery Life: Over 8 hours in normal use (offsite locations with backlight off). Data is not lost with the end of the battery. Charger: Drops, fast charge and trickle charge and intelligent. It also acts as a continuous power supply. Recharge Time: 3 hours
Standard Accessories- Accelerometers (2)
- Sensor cables (2 straight, one coiled)
- Magnetic Base (2)
- Power supply
- USB communication cable
- CD firmware / instructions and carrying case for storing the equipment.
- Calibration with NIST traceability.
Technical Specifications CSI 2130- Specialized Analysis
- Speed Data Analysis
- Capacity Analysis
- Setting interactive data acquisition for the following types of analysis:
High frequency- High Resolution
- fault detection in bearings and gears
- Low Frequency
- Order tracking
- Time Sync
- Shock Test (online and offline)
- Test parade with charts peak and peak / phase
- Detection of change of speed (vibration and laser)
- Rotor fault detection, analysis and cross-channel analysis of two orbits.
- Spectrum of 1000 Hz with 400 lines: 0.14 sec / average
- Spectrum of 1000 Hz with 1600 lines: 0.5 sec / average
- Autoranging: typical background noise less than 0.2 micro-volts/Hz in a frequency range of 1,000 Hz.
- PeakVue: Built in, selectable filters.
- Demodulation: Built in, selectable filters.
- SST: Built with Processing Low Frequency.
Available Models:- CSI 2130 A2 - Collector and Analyzer 02 Channels
- CSI 2130 A1 - Collector and Analyzer 01 Channel
- CSI 2Q 2130 CU - Collector and Analyzer 02 Channels (Intrinsically Safe)
- CSI 2130 D1 - Collector Channel 01
CSI 1850 – Meter Vibration GLOBAL LEVEL
- Measurement of acceleration and velocity in RMS.
- Audio output with headphones included.
- Includes letter of the severity of vibration on the back of the unit.
- Work on standards ISO2954 and ISO10816 vibration.
- Operates on standard 9V battery.
- Accelerometer independent
- Back
